HomeProductsNewsContact Us

Classification And Correct Selection of Work Gloves 1

Nov. 09, 2019

From the perspective of safe production, the hand is the most harmful part of the human body. Work gloves are an essential labor insurance item in our daily work. All kinds of work gloves are used in different places because of their different functions. Therefore, it is very important to master the classification and correct selection of work gloves. The use of protective gloves must be selected according to the protective function of the gloves, and should not be used indiscriminately to avoid accidents. Work gloves manufacturer teaches you the correct use of industrial gloves.

Insulated Thermal Gloves

1. Insulated Thermal Gloves:

It refers to an insulating glove that is used for electrical insulation on the hand when the operator performs live working on an electrical device (or a DC electrical device of the corresponding voltage level) with an AC voltage of 10 kV or less. The product model, dimensions and technical requirements shall comply with the provisions of the General Technical Conditions for Insulating Gloves for Live Working.

Gloves must have good electrical insulation properties. At the same time, it also needs good tensile strength and elongation at break, as well as puncture resistance, aging resistance, flame resistance, and low-temperature resistance.

2. Chemical resistant gloves:

Chemical protective gloves are protective gloves for the prevention of chemical solvents that may damage the hands. The quality should be in accordance with the provisions of the Acid (Alkali) Gloves. Gloves are not allowed to have defects such as blooming, brittleness, stickiness and breakage. The non-leakage of the glove means that it must be airtight, and under certain pressure, no air leakage occurs.

Anti-chemical gloves can be divided into latex gloves, rubber gloves, PVC gloves, nitrile gloves, etc. according to the material. Most medical gloves used in hospitals are also nitrile or rubber, which will not be described in detail here.

3. Welding gloves:

Personal protective equipment to protect against high temperatures, molten metal, and sparks during welding. It is made of cow, pig leather or two-layer leather. It is divided into two-finger, three-finger, and five-finger according to the finger type. Welder gloves have strict appearance requirements. The first grade: it requires the leather body to be even and thick, full and soft and elastic. The leather surface is fine, uniform, firm, and the color is uniform and without the greasy feeling. Second grade: the leather body lacks fullness and elasticity, the leather surface is rough, and the color is slightly dark.


Hot Products
Double Layer Freezer Gloves/CRG-015 Double Layer Freezer Gloves/CRG-015
Nitrile Coated Cut Resistant Safety Work Gloves/CRG-004-R Nitrile Coated Cut Resistant Safety Work Gloves/CRG...
PU Dipped HPPE Gloves/CRG-003-B PU Dipped HPPE Gloves/CRG-003-B
BBQ GLOVES/HRG-003 BBQ GLOVES/HRG-003
Contact Us
  • No.88 Wenchangge Road, Lianghu industrial Zone, Shangyu, Zhejiang, China.
  • +86 575 8242 6868
    +86 575 8242 6778
  • sales@shangyu-best.com
Follow Us

Copyright © Shangyu Best Apparel and Accessories Company All Rights Reserved

Technical Support: